A multigrid perspective on the parallel full approximation scheme in space and time

For the numerical solution of time‐dependent partial differential equations, time‐parallel methods have recently been shown to provide a promising way to extend prevailing strong‐scaling limits of numerical codes. One of the most complex methods in this field is the “Parallel Full Approximation Scheme in Space and Time” (PFASST). PFASST already shows promising results for many use cases and benchmarks. However, a solid and reliable mathematical foundation is still missing. We show that, under certain assumptions, the PFASST algorithm can be conveniently and rigorously described as a multigrid‐in‐time method. Following this equivalence, first steps towards a comprehensive analysis of PFASST using blockwise local Fourier analysis are taken. The theoretical results are applied to examples of diffusive and advective type.     

Determination of macrolides in livestock excreta by syringe purification coupled with liquid chromatography tandem mass spectrometryEI北大核心CSCD

A method of syringe-dispersive solid-phase extraction combined with ultrahigh performance liquid chromatography with tandem mass spectrometry for the simultanous determination of 10 macrolides in manurebased fertilizers was developed. After extraction with methanol and acetonitrile,the extracts were purified by insyringe dispersion solid-phase extraction in syringes pre-filled with 60 mg PSA and 30 mg C18. The resulted extracts were further separated by a BEH C18 column,detected by multiple reaction monitoring in electrospray positive ion mode,and quantified by matrix-matched external standard method. The results showed that the recoveries of the target compounds ranged from 70% to 110% at three spiked levels（10,30,and 50 μµg/kg）with the relative standard deviations ranged from 1.4% to 12%. The limits of detection and quantification were 0.57 1.75 and 2.77-5.40 μµg/kg,respectively. This method was suitable for the simultaneous determination of residual macrolides in organic fertilizers. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.     

芥子气中毒人员尿液标记物谱分析及其临床诊断应用

该研究基于暴露生物标记物溯源思路,应用于解决芥子气(SM)临床早期诊断、溯源确证难题。建立了芥子气中毒患者尿液中7种游离代谢产物的两步固相萃取/超高效液相色谱-串联质谱(SPE/UPLC-MS/MS)同时定量方法,检出限为5 pg/mL~1 ng/mL,定量下限为10pg/mL~5 ng/mL;结合前期建立的4种游离碱基加合物的同位素稀释-UPLC-MS/MS定量方法,对1例疑似芥子气中毒人员尿液中可能赋存的生物标记物进行了全筛查分析。尿液中共检出3类10种生物标记物,包括首次报道的游离代谢产物芥子亚砜,可确证患者为芥子气中毒;除硫二甘醇外,标记物含量均在暴露后3~4 d达到峰值,随后降低,至7 d仍可检出,其中谷胱甘肽加合物的β裂解产物含量相对较高,可作为芥子气中毒早期诊断与疗效评估的重要指标。     

非衍生化高效液相色谱-串联质谱法快速检测生物体液中草甘膦、草铵膦及代谢物

建立了一种非衍生化高效液相色谱-串联质谱快速检测生物体液中草甘膦、草铵膦及其代谢物等8种极性农药的方法。8种极性农药经Metrosep A Supp 5阴离子色谱柱(150 mm×4.0 mm,5μm)分离,以纯水-200 mmol/L碳酸氢铵溶液(含0.1%氨水)为流动相进行梯度洗脱,负离子多反应监测(MRM)模式进行检测。实验结果表明,8种极性农药在0.5~50 ng/mL范围内线性关系良好(r²>0.99),检出限(S/N≥3)为0.08~0.3 ng/mL,定量下限(S/N≥10)为0.3~1 ng/mL。方法的基质效应为86.5%~106%,目标化合物的回收率为81.5%~114%,日内相对标准偏差(RSD)为0.30%~2.8%,日间RSD为0.50%~5.3%。该方法无需复杂的衍生化过程,简便快速、灵敏度高、稳定性好,适用于生物体液中8种极性农药的检测。     

提高金属有机骨架材料在二氧化碳热催化转化中的性能:策略及前景展望

近年来,大气中CO2的浓度不断增加,带来全球变暖等一系列严重后果,成为国际社会共同关注的环境问题.将CO2催化转化为高附加值化学品可有效降低其向大气中的排放,同时可实现其资源化利用,符合低碳社会的发展目标.目前,已有多种催化体系实现了CO2向不同化学品的转化.然而,由于CO2自身的热力学稳定性和动力学惰性,这些转化通常需要在苛刻的反应条件和较高能耗下进行.设计开发高效催化体系、实现温和条件下CO2的转化利用引起了工业界和学术界的广泛兴趣.金属有机骨架材料(MOFs)是一类由有机配体和金属中心通过配位键组装而成的有机-无机杂化材料,在很多方面展现出良好的应用性能.由于其结构的多样性、可设计性、高比表面积和多孔性等独特性质,MOFs在催化领域吸引了很多研究者的关注.其中,MOFs作为非均相催化剂在CO2热催化转化中表现出良好的应用前景,已实现多种CO2向高值化学品的转化路径.但这些催化体系也存在一些缺点,如有些MOFs材料在催化反应中稳定性差以及其微孔性对反应中的传质造成限制等.因此,设计稳定的MOFs和MOF-基材料并对其结构进行优化改性,从而在温和条件下实现高效的CO2转化具有重要意义.本文综述了提高MOFs在CO2热催化转化反应中性能的几种策略:(1)对MOFs结构中的配体进行设计,包括具有活性官能团的配体、活性配合物作为配体和引入混合配体设计多元MOF;(2)调节MOFs结构中的金属中心,设计混合金属中心和包含活性金属团簇的金属中心;(3)构筑多级孔MOFs;(4)设计MOF-基的复合材料,包括MOFs作为载体与金属纳米颗粒、活性配合物和聚合物构建复合材料;(5)利用MOFs作为前驱体制备MOF-基衍生物材料,重点阐述了如何增加MOFs作为非均相催化剂的催化活性位点以及在CO2转化反应中各位点之间的协同作用.此外,介绍了原位表征技术在MOF-基材料用于CO2固定和转化中的应用.最后,分析了MOF-基非均相催化材料在CO2热催化转化领域目前面临的问题和挑战,包括MOFs材料结构优化、催化机理研究和规模化制备等方面,并对未来的发展趋势进行了展望.     

甘油氧化的光谱电化学傅里叶变换衰减全反射谱红外光谱薄膜流动池中硼酸镍层厚度的优化

在碱性甘油电氧化反应中,利用电化学傅里叶变换衰减全反射谱红外光谱法,研究了薄膜流动池中滴注硼酸镍催化剂负载量对玻碳电极性能的影响.连续操作的径向流动池包括一个位于内反射元件上方50μm的钻孔电极,可实现红外光谱分析.这是在确定条件下对电催化剂进行简便和可重复筛选的一个适合的方法,同时还提供了对复杂反应(如甘油氧化)产物选择性的检测.通过对泵送电解液进行更耗时的定量高效液相色谱分析,结果表明,衰减全反射红外光谱法可快速鉴定产物.在层流条件下,水中使用0.1 M甘油和1 M KOH,流速为5μL min-1时,甘油转化率较高.转化率和选择性取决于催化剂的负载量,负载量又决定了催化剂层的厚度和粗糙度.由于在更粗糙的膜中停留时间更长有利于再吸附和C-C键断裂,因此当负载量最高达210μg cm-2时,甘油转化率为73％且甲酸选择性接近80％.当最低负载量为13μg cm-2时,甘油转化率达到63％,甲酸选择性降至60％,相应地,C2物种(如乙醇酸盐)选择性较高,为8％.因此,只有催化剂负载量较低时才能形成几微米厚度范围内的薄膜,此时才适合进行优质催化剂的筛选.     

Analytical Methods for Determination of Phytic Acid and Other Inositol Phosphates: A Review

From the early precipitation-based techniques, introduced more than a century ago, to the latest development of enzymatic bio- and nano-sensor applications, the analysis of phytic acid and/or other inositol phosphates has never been a straightforward analytical task. Due to the biomedical importance, such as antinutritional, antioxidant and anticancer effects, several types of methodologies were investigated over the years to develop a reliable determination of these intriguing analytes in many types of biological samples; from various foodstuffs to living cell organisms. The main aim of the present work was to critically overview the development of the most relevant analytical principles, separation and detection methods that have been applied in order to overcome the difficulties with specific chemical properties of inositol phosphates, their interferences, absence of characteristic signal (e.g., absorbance), and strong binding interactions with (multivalent) metals and other biological molecules present in the sample matrix. A systematical and chronological review of the applied methodology and the detection system is given, ranging from the very beginnings of the classical gravimetric and titrimetric analysis, through the potentiometric titrations, chromatographic and electrophoretic separation techniques, to the use of spectroscopic methods and of the recently reported fluorescence and voltammetric bio- and nano-sensors.     

Upgrading Solid Digestate from Anaerobic Digestion of Agricultural Waste as Performance Enhancer for Starch-Based Mulching Biofilm

Developing a green and sustainable method to upgrade biogas wastes into high value-added products is attracting more and more public attention. The application of solid residues as a performance enhancer in the manufacture of biofilms is a prospective way to replace conventional plastic based on fossil fuel. In this work, solid digestates from the anaerobic digestion of agricultural wastes, such as straw, cattle and chicken manures, were pretreated by an ultrasonic thermo-alkaline treatment to remove the nonfunctional compositions and then incorporated in plasticized starch paste to prepare mulching biofilms by the solution casting method. The results indicated that solid digestate particles dispersed homogenously in the starch matrix and gradually aggregated under the action of a hydrogen bond, leading to a transformation of the composites to a high crystalline structure. Consequently, the composite biofilm showed a higher tensile strength, elastic modulus, glass transition temperature and degradation temperature compared to the pure starch-based film. The light, water and GHG (greenhouse gas) barrier properties of the biofilm were also reinforced by the addition of solid digestates, performing well in sustaining the soil quality and minimizing N₂O or CH₄ emissions. As such, recycling solid digestates into a biodegradable plastic substitute not only creates a new business opportunity by producing high-performance biofilms but also reduces the environmental risk caused by biogas waste and plastics pollution.